Cape WT10 Standard Specifications
and Options

MAIN HULL

• Eglass laminate with extensive use of carbon fiber on structural reinforcement.

• Hull color: Snow white

OUTRIGGER HULLS

• Eglass laminate with extensive use of carbon fiber on structural reinforcement.

• Hull color: Snow White with White Tip shark wrap


DECK

• Eglass laminate with extensive use of carbon fiber on structural reinforcement.

• Deck color: Matt on white with orange cabin top finish


BULKHEADS

• Eglass laminate with extensive use of carbon fiber on structural reinforcement.


COCKPIT / TRANSOM

• Symmetrical cockpit bench seating with protective coamings.

• Storage for life raft at the aft end of the cockpit.

• Four winch handle holders.

• Manual bilge pump near the helm.

• One navigation compass.

• Two foot holds in the cockpit for helmsman with main sail trimming on either side


STEERING

• Single composite rudder blade & rudder casing with rudder stock

• Two composite daggerboards with daggerboard casing, one in each outrigger.

• Rudder with gudgeons and pintles.

• Composite tiller with telescopic stick.

Cape WT 10

RIGGING

• 14metre Deck-stepped 2-piece pivoting carbon mast with Arthur

• Fractional rig, 1 level A frame with 1 level of pushing spreaders

• Composite shrouds.

• Anodised aluminium boom

• Dyform forestay with hardware for hanked-on sail

• Port and starboard LED navigation lights on pull-pit

• Stern LED navigation light on push-pit

• LED steaming light on mast

• LED sails trimming light on mast

• Delivered with three sails and mainsail cover


RUNNING RIGGING

• Two multipurpose genoa halyards

• 2:1 mainsail halyard with shackle

• 2 masthead spinnaker halyards

• 1 Staysail halyard

• Two genoa sheets

• Two inhaulers for the genoa

• Two down-haulers for the genoa

• One mainsheet with fine-tune

• One mainsail outhaul

• Adjustment lines for mainsheet car

• Two reefing lines

• Boom vang

Cape WT 10

DECK HARDWARE

• Composite bowsprit with fitting for mounting a code 0/Code three furler
or asymmetric spinnaker

• Forward pulpit

• Anchor locker

• Aft pushpits

• 2 x PVC-coated side nets.

• 2 x PVC-coated bow nets.

• Two mooring cleats forward (on deck edge of the main hull)

• Two mooring cleats aft (on the deck edge of the main hull)

• Three hatches on the main hull and one hatch on each outrigger

• Mainsail traveler track in the cockpit,

• Harken/Ronstan deck hardware,

• Spinlock line jammers on coachroof for halyards and control lines,

• 2x Two-speed performance self-tailing winches on coachroof for halyards and

control lines. Either - Ronstan Orbit 30Q - Harken Performa Aluminium 35

• 2x Two-speed Performance self-tailing winches in the cockpit for genoa, code zero, or

Spinnaker. Either - Ronstant Orbit 40QT - Harken. Performa Aluminium 40

• 2x Two-speed Performance self-tailing winches in the cockpit for the mainsail sheet. Either - Ronstan Orbit 30QT - Harken Performa Aluminium 35

• 3 Winch Handle

• 2 Guiding fairleads for genoa sheets,

• 2x 3d genoa controls on coach roof

• Chainplates for shrouds on hull sides,

• Fully equipped mast step with halyard blocks

Cape WT 10 Interior

COMPANIONWAY

• Five steps with non-slip strips on a sliding rail allowing access to the rear cabin

• Sliding GRP hatch

• Handrails on each side of the companionway

• Large fixed plexiglas® window on coachroof, allowing forward and upwards view

ELECTRICAL PANEL

• Electrical panel for “O`shore” use

• Double USB plug

• Voltmeter for the engine battery bank

• Voltmeter for the house battery bank


ELECTRICS

• Two lithium batteries

• 6 SOLAR Panels on beams and floats

• Automatic bilge pumps in all hulls

CHART TABLE

• Chart table to port with storage, desk compatible with laptop/ tablet and marine

computers

• Panel for electronics, with easy access to cabling

• Large fixed plexiglas® window on coachroof, allowing forward and upwards view


GALLEY

• Galley to starboard

• Storage with countertop

• Storage and access to through-hull

• 1 Stainless steel sink with pressurized cold-water tap

• Storage for flatware,

• One electric hob

• 1x 12volt 40 L / 11 US gal fridge

• Large fixed plexiglas® window on coachroof allowing a forward and upward view

Cape WT 10 Interior

SALOON

• Table with folding leaves

• Port bench seats with backrests, with storage under bench seat and behind

backrests

• Starboard folding bench seats with backrests, with storage behind backrests,

• Storage space forward of the starboard bench seat

• Six removable storage baskets (3 on either side)

• Cushions and backrests have removable covers– Sunbrella®,

• Removable floorboards,

• 100 L / 26 US gal water tank under saloon seating.


AFT CABIN

• Double berth

• 100mm foam mattresses with removable fabric covers

• Storage fiddles on either side of the mattress

• Rear hatch

• One port opening into the cockpit per cabin

• One fabric hanging locker in each cabin

• Storage space underneath the berths

• Access to battery switches

• Carbon sail cloth cabin door with zip

HEAD COMPARTMENT

• Finished in GRP

• Lightweight GRP sink with pressurized water tap

• One opening deck hatch with vent

• One marine head with manual pump

• 40 L / 11 US gal holding tank, with crusher and flush valve.

Cape WT 10 Interior

FORWARD CABIN

• V berth long with 100mm foam mattresses with removable fabric covers

• Composite bulkhead with thorough access via a watertight PVC hatch


FORWARD SECTION

• Watertight crash bulkhead

• Anchor locker


ENGINE

• See options


MISCELLANEOUS

• Owner’s manual

• All through-hulls are flush-mounted

• Bilge pump

• Three mooring lines

• Three rectangular fenders


HEADROOM

• Companionway: 1.83 m / 6’0" approx.

• Saloon 1.86m / 6’1" approx.

• Forward end of saloon: 1.74 m / 5’7" approx.

• Aft cabins (height above bunk): 0.65m / 2’1" approx.

• Forward cabin (height above bunk): 0.80m / 2’6" approx.

Cape WT 10 Interior

MAIN OPTIONS

• Running rigging for asymmetric spinnaker

• Genoa furler – karver

• Headstay foil

• Carbon-fibre boom

• Shorepower, battery charger

• Lee cloth kit in the saloon on the port side

• Electronics package, to be discussed with the owner

• Two instrument repeaters mounted either

o Near helmsman

o By entrance

• GPS at the chart table with Wifi router, to be discussed with the owner

• Autopilot to be discussed with the owner

• Halyard bags in the cockpit,

• Swim ladder


ENGINES

• Outboard - Electric: Mercury Avator range recommended.

• Inboard - E propulsion Pod Drive 6.0 Electric inboard recommended.

- Engine throttle in the cockpit

- Engine panel in the cockpit,


TRANSPORT

• Trailer